BKDWW - PREMIUM ROOF PRO ELASTOMERIC COATING
- MSDS: BKDWW
- Manufacturer: MACKLANBURG DUNCAN
- Product Name: PREMIUM ROOF PRO ELASTOMERIC COATING
- National Stock Number: 8010-00F015721
Product Identification
Product ID:PREMIUM ROOF PRO ELASTOMERIC COATING
MSDS Date:07/26/1989
FSC:8010
NIIN:00F015721
MSDS Number: BKDWW
Responsible Party
OKLAHOMA CITY, OK 73125
Emergency Phone: (405) 528-4411
Info Phone: (405) 528-4411
Cage: 82464
Contractor
Telephone: 800-654-8454 / 405-528-4411
Cage: 82464
Ingredients
ETHYLENE GLYCOL (SARA III)
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: <5%
OSHA PEL C 50 PPM
ACGIH TLV: C 50 PPM,VAPOR; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/INGESTION: IRRITATION.
INHALATION: DIZZINESS, BREATHLESSNESS, DROWSINESS, & NAUSEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/INGESTION: IRRITATION. INHALATION:
DIZZINESS, BREATHLESSNESS, DROWSINESS, & NAUSEA.
First Aid
First Aid:SKIN: WASH THOROUGHLY W/SOAP & WATER. INGESTION: DON'T INDUCE
VOMITING. INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION
IN ALL CASES.
Fire Fighting
Flash Point:>197F
Extinguishing Media:CO2, FOAM, & DRY CHEMICAL.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS IN
POSITIVE PRESSURE MODE & FULL PROTECTIVE EQUIPMENT.
Accidental Release
Spill Release Procedures:SCRAPE INTO CONTAINERS.
Handling
Handling and Storage Precautions:DON'T STORE NEAR HEAT SOURCES, SPARKS,
OR FLAME. STORE BETWEEN 40-120F. DON'T FREEZE. DON'T INGEST. KEEP
AWAY FROM CHILDREN.
Other Precautions:USE IN WELL VENTILATED AREAS.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED CARTRIDGE RESPIRATOR IF
VAPORS ARE >TLV.
Ventilation:LOCAL EXHAUST: AT LEVEL ADEQUATE TO KEEP
Eye Protection:AS REQUIRED
Work Hygienic Practices:WASH SKIN & HANDS AFTER USE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:>212F
Spec Gravity:1.47
Evaporation Rate & Reference:SLOWER THAN BU AC
Solubility in Water:COMPLETE
Appearance and Odor:WHITE, SMOOTH PASTE W/SLIGHT AMMONIA ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS
Stability Condition to Avoid:HEAT SOURCES, SPARKS, FLAME, TEMPERATURES
<40F OR >120F & FREEZING.
Hazardous Decomposition Products:CO2, CO, TOXIC GASES & AEROSOLS.
Disposal
Waste Disposal Methods:SANITARY LANDFILL, DISPOSE OF IN ACCORDANCE
W/LOCAL, STATE, & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.